Archive for Software category

Fixing 64 Bit Xilinx Apps Crashing Under Windows 8.1

Continue Reading

Several pieces of the Xilinx toolchain use the SmartHeap library. This library hooks allocator functions in msvcrt.dll by export – overwriting the original functions with jumps to their patched versions. This used to be fine, but now several of the allocator entrypoints on msvcrt are simply jumps to the real implementation. These are short jumps, so the instruction size count is small (typically 2-3 bytes). Add to that the 5 NOP bytes that usually pad functions apart and that isn’t enough for SmartHeap’s overwrite jumps. Here’s an example of the trampoline they write:

That’s 12 bytes – 4 too many. What I was seeing is the overwrite for operator new stomping over wcscmp which is right after it, and the application crashing later when calling this function:

You can see here how wcscmp has been overwritten by the tail of the patch. I did some searching around and found this post by a Xilinx employee, explaining how to turn off SmartHeap.

Basically the gist of it is that in the ISE_DS\ISE\lib\nt64 directory, back up libPortability.dll (which links to SmartHeap), and rename libPortabilityNOSH.dll to libPortability.dll. This fixed ISE for me, but unfortunately a lot of the other Xilinx tools have their own lib\nt64 directories with duplicate copies of libPortability.dll. For each lib\nt64 directory, you’ll need to overwrite libPortability.dll with that original libPortabilityNOSH.dll – which is not duplicated in the non-ISE lib\nt64 directories.

I checked for updates and it appears I’m running with the latest version (14.7) with no updates available. Hopefully Xilinx will distribute an update for the SmartHeap binaries.

How to upgrade onboard NAND flash in allwinner A10 based devices (and possibly other members of the AllWinner processor family)

Continue Reading

nand_board

Ever since I saw a YDPG18A mod post where flash was upgraded (unsuccessfully), I’ve been curious about upgrading NAND flash. After I started investigating I realized the upgrade mentioned wouldn’t work, so I called the guy on it and he mentioned it didn’t work, just that he hadn’t gotten around to posting about it. If he’d found the exact same model flash chip as the existing one, soldered it on, and reflashed, it would have worked. But a lot of the flash chips used in these devices are old and hard to get ahold of. Luckily, they use a standard footprint (TSOP48), and a standard pinout used for SLC and MLC NAND flash.

Close
Latest Tweets